Specifications include, but are not limited to: Provide Janitorial Services, Grounds Maintenance, and Snow and Ice Control, and other incidental work for the Medway Rest Area; Preliminary Cleaning: The facility will be given a complete top to bottom cleaning of all rooms, floors, rugs, walls, doors and windows, (both exterior and interior), entryways, and moldings.; Cleaning Restrooms - This work includes cleaning all plumbing fixtures, lavatories, toilet bowls, dispensers, wainscots, doors, and stall partitions, as required, and filling all paper/soap dispensers as needed. Scouring powder may be used on plumbing fixtures or may be used for water closets and urinals, if required, on approval by the Agreement Administrator. All stains or spots shall be removed from wainscots or stall partitions, using a damp cloth with detergent. Floors shall be swept, and damp mopped daily using a germicide.; Cleaning Slop Sinks, Vending Machines and Drinking Fountains - All items will be cleaned using detergent or scouring powder, if required. Cabinets or water chillers shall be wiped clean with a damp cloth. Any spillage on floors or walls adjacent to fixture shall be wiped clean with a damp cloth.; Sweeping - All tile, wood, or concrete floors, stairways, landings, and stoops shall be swept with broom or mop or mechanical brush-vacuum sweeping without damage or disfigurement of furniture, doors, or base trim. Oil treated mops shall not be used. Dust, dirt, and debris shall be removed to receptacles provided for this purpose on the building exterior. Reset furniture upon completion of sweeping.; Vacuuming - Carpeting and furniture shall be vacuumed and the dirt, dust and debris removed to receptacles provided by the Contractor on the building exterior. Spots shall be removed from rugs and carpets as they occur. A commercial/industrial vacuum cleaner equipped with a HEPA filter shall be utilized.; Damp Mopping Floors - Damp mop all resilient tile floors, terrazzo, quarry tile, ceramic tile, and concrete floors, including stairs and landings, using cotton or sponge mops, appropriate stain removal agents, unheated water and detergent, if required, using as small amount of water as possible. Follow with clean water rinse and pick up again using as small amount of water as possible. Where floor drain exists, water will be added periodically to prevent traps from becoming dry.; Floor Scrubbing - Scrub floors by use of deck brush, cylindrical or disc type machine or automatic machine scrubber and detergent solution using as small amount of water as possible followed by plain water rinse and pick up. This scrubbing will be followed by the application of a floor finish system applied in accordance with the manufacturer’s specifications. Baseboards shall be thoroughly cleaned after buffing.; Finish Removal - Removal or stripping of all finish down to the flooring material, using compound specifically prepared for this purpose, with steel wool or brush agitation as required, followed by rinsing with plain water to remove all finish material, solution, dirt and film from baseboard edge to baseboard edge.; Floor Waxing and Finishing - All floor waxes or finishes (i.e., carnauba, acrylic, polymeric) will be compatible with floors on which applied and shall be applied in accordance with the manufacturer’s recommendations.; Floor Touchup - Application of finish material and buffing in heavy traffic areas between primary refinishing as required.; Buffing - All finished and terrazzo floors shall be buffed periodically to remove traffic marks, heavy soil, etc., to be followed by sweeping, vacuuming, or dust mopping to pick up loose residue.