Specifications include, but are not limited to: SC-1: ASPHALTIC CONCRETE SURFACING shall be completed in accordance with City of Topeka and Shawnee County Standard Technical Specifications, latest edition and addenda thereto.SC-1.1: Mix Designation: BM-2ASC-1.2: Mix Design Criteria: Principal / Minor ArterialSC-1.3: Asphalt Binder: PG 70-28 - Meeting requirements as specified in Section 1200 KDOT Standard SpecificationsSC-1.4: Asphalt for Tack Coats: SS-1HP - Meeting requirements as specified in Section 1203 KDOT Standard SpecificationsSC-2: COLD MILLING EQUIPMENT: Contractor shall provide a self-propelled machine capable of cold milling asphalt pavement and loading milled material directly into trucks in a single pass measuring 12feet in width and 2 inches in depth. The cold milling machine shall be equipped with automatic grade and slope controls capable of maintaining a uniform grade and cross slope.SC-3: PAVING OPERATIONS: Contractor shall place 2” of compacted HMA on the milled surface in four passes, each pass measuring 11 feet in width. HMA shall be spread and finished to the specified crown and grade using an automatically controlled HMA Paver approved by the Engineer prior to paving operations. Operate the paver at a speed which shall provide a uniform rate of placement without undue interruption. At all times, keep the paver hopper sufficiently full to prevent non-uniform flow of the HMA to the augers and screed. If the automatic grade control devices break down, the Engineer may allow the Paver to operate to the close of the working day, provided the surface is satisfactory. Do not operate the Paver without working automatic control devises upon another lift that was laid without automatic controls. Do not raise (dump) the wings of the Paver receiving hopper at any time during the paving operation. The Engineer may waive this requirement if it is determined that raising (dumping) the wings will not produce detrimental segregation. HMA material will not be deposited on the roadway and a pick-up device used to transfer HMA to the Paver.