Specifications include, but are not limited to: MAKE AND MODEL BID Color Units shall be painted manufacturer's standard industrial color. Operating Weight The standard operating weight shall not be less than 5,600lbs. Cab and Body Unit shall be fitted with a fully enclosed cab with easy access doors that meets current regulations for ROPS and FOPS. Shall be equipped with the following: Seat with seat belts. Drivers side shall be a suspension type seat. Fenders, front and rear if available. Cab heater and air conditioning. Windows front and rear. With rear window guard. Cruise control. Front windshield intermittent wipers. Monitoring system shall be manufacturer's standard and include an hour meter, fuel indicator, full instrumentation audio/visual system and key start. Am/Fm radio. Shall have a hydraulic dump box with a 2000lb rated capacity. Shall have front mounted lift arm system capable of lifting 1,500lbs. Lift arm float shall also be provided. Electrical System The electrical system shall be 12-volt. Electrical system shall include: Horn. LED work lights minimum (two) 2 front and (two) 2 rears. Shall also have road light kit. Backup alarm. Heavy duty battery or batteries with a minimum cold cranking capacity at 0-degree Fahrenheit of 600 amps. Street legal lighting. Pre-wired for beacon (12 volt) with factory beacon bracket. If needed 24 to 12-volt converter shall be provided. Steering and Suspension Shall have all wheel steer capabilities. Four-wheel independent suspension. Overall width shall not exceed 60”. Wheel and Tires Wheels shall be standard to the industry and unit manufacturer. Tires shall be tubeless front and rear, 27 x 10.5-15. Brakes Manufacturer’s standard parking brake shall be provided.