Specifications include, but are not limited to: 1. Removal of current doors. 2. All work should be the exact products as below or equivalent. 3. One (1) EFCO 402 door frame sized approximately 40” x 81 5/8” to include an undersized 3’0”x 6’8” EFCO T300 Medium Stile door. See example SF1 for approximate size and configuration. 4. One (1) EFCO 402 door frame size approximately 51 ¾” x 81 5/8” to include an undersized 3’0” x 6’ 8” EFCO T300 Medium Stile door. See example SF2 for approximate size and configuration. 5. Two (2) EFCO 402 door frames sized approximately 51 ¾” x 81 5/8” to include an undersized 3’0” x 6’8” EFCO T300 Medium Stile door. See example SF3 for approximate size and configuration. • Door Hardware Set: SF1, SF2 and (1) SF: • Select SL24 continuous geared hinge (clear anodized) • Falcon 1790 Rim panic with exterior keyed cylinder (clear anodized) • Ultrline 1” diameter offset pull (clear anodized) • Falcon SC60 surface mounted closer with 18 P.A. drop plate (aluminum) • 3 ½” Mid Rail (bone white) • Bottom door sweep (clear anodized) • ½” x 4” Threshold (mill) 6. Door Hardware Set (1) SF3: • Select SL24 continuous gear hinge (clear anodized) • Falcon 1790 Rim panic with exterior keyed cylinder (clear anodized) • Ulrline 1” diameter offset pull (clear anodized) • Horton 7100 automatic operator with two wireless wall switches (aluminum) • 10” Bottom Rail (bone white) • 3 ½” Mid Rail (bone white) • Bottom door sweep (clear anodized) • ½” x 4” Threshold (mill) 7. Door Frame finish to be EFCO bone white. 8. Glazing to be 1” Dlear Tempered Insulated Units with Energy Advantage Low-E on the #3 surface. 9. Glazing @ lower lites to be 1” White Stucco Panel. 10. Caulking color to match.
