Specifications include, but are not limited to: replacement of the exterior windows at Iowa State Patrol District #9.; 1. The Contractor’s Work includes all labor, supervision, materials, equipment, services, supplies, tools, facilities, transportation, hoisting, storage, receiving, licenses, inspections, certifications, overhead, profit, or other items required or reasonably inferable to properly and timely perform and complete all work and services to be performed by the Contractor pursuant to this Agreement. Unless specifically stated otherwise, incidental work required to accomplish the work of this Package shall be included the quote. This would include, but not be limited to, temporary facilities, protection of the work, security of equipment, materials, and work in progress, etc. Contractor’s Work shall be performed in accordance with the Drawings.; 2. Contractors Package Shall include all work included in the Project Drawings.; 3. Contractor to pick up Building Permit from city of Cedar Falls prior to commencement of work.; 4. Contractor responsible for scheduling required inspections with the city of Des Moines Building Department, and the owner’s third-party inspector.; 5. Contractor is responsible for all labor and equipment to unload, account for all material delivered, stock, and delivery for this scope of work. Storage and delivery of materials and equipment at the Site shall be permitted only to the extent approved in advance by the Construction Manager, and if anything, so stored obstructs the progress of any portion of the work, it shall be promptly removed or relocated by the Contractor without reimbursement.; 6. On site supervision by Prime Contractor at all times work by that contractor or their subcontractors/suppliers is taking place.; 7. Provide all temporary facilities required for this scope of work including, but not limited to, secured storage, temporary power for work, temporary and task lighting for work, and temporary toilets as determined necessary by Contractor.; 8. Contractor shall provide all equipment and tools for Contractor’s own cleanup. Clean up shall be done at end of every shift or more frequently if required for the Contractor to perform their work, for other Contractors to perform their work, as required by the Owner’s operations, and at the discretion of the Construction Manager.; 9. All turf, landscaping, and subgrade disturbances caused by equipment traffic or other activities related to the Contractor’s scope shall be repaired or restored to proper conditions by the Contractor.; 10. Protect adjacent existing building elements from damage from Scope of work. Repair existing building elements damaged during Contractor’s Scope of work.