Specifications include, but are not limited to: The work covered under this solicitation shall consist of permits and inspections for the labor, equipment, materials, tools, transportation, and incidentals necessary for providing all parts, labor, and construction waste disposal within PCA requirements. For the performance of the scope listed below. 1. Tear off and legally dispose of existing shingle system down to structural decking along with roof related metal and flashing. a. All roofing fasteners to be removed from deck surface. b. Deck replacement need to be approved by the project manager and will be charged an additional $2.00 per square foot. 2. Install GAF Weather Watch ice and water shield 3’ inside wall lines and 3’ around all penetrations and in valleys. Wrap and seal under flashing, and siding. 3. Install new GAF Shingle Mate 30# felt or equal to over ice and water and entire roof surface. 4. Install new drip edge to all eave and rake edges. a. Color of drip edge to match existing as closely as possible. Installed under ice and water shield. 5. Install new asphalt shingle roof in accordance local building codes and related specifications and warranties. a. Shingles to be GAF Timberline HD or equal to. Color to be chosen by owner. b. Shingles to overhang ½” at all rake and eaves. c. Shingle starter to be used at all rake and eaves. d. All shingles to be attached with 6 fasteners per shingle. 6. Install new GAF TimberTex Ridge or equal to, Broans (black), and chimney and pipe flashings. 7. Price includes all applicable permits and equipment to complete project. GAF Certain Teed Landmark are preferred materials. Flashings best matched to roof.