Specifications include, but are not limited to: All Manufacturers’ recommendations regarding service schedules and lubrication types are to be followed at the prescribed frequency. Scheduled oil samples shall be conducted at manufacturer’s recommendation. In the event a manufacturer preventative maintenance schedule is not available, perform the following every 180 days or 3,500 miles (whichever comes first with approval of the city): 1. Change engine oil & filter, check air and fuel filters; 2. Check fluid levels – brakes/cooling/battery/other; 3. Lubricate per manufacturer’s recommendations; 4. Check and tighten all belts and hoses; 5. Check all brakes and clutch play (if applicable); 6. Inspect tires/exhaust/suspension/steering/glass/body; 7. Check all lights – head/stop/turn/running/etc.; 8. All safety equipment is to be operational: heaters, defroster, windshield wipers, etc.; 9. Vehicle batteries shall be checked for charge; 10. Check front end alignment/align as needed; 11. Perform all other routine maintenance requirements of the manufacturer; 12. Test drive; Annually: 1. Check and repack wheel bearings if needed; 2. Inspect ball joints, tie rods, etc. for wear; 3. Comprehensive engine tune-up per manufacturer’s specifications; 4. Perform all other routine maintenance requirements of the manufacturer; 5. Test drive
