Specifications include, but are not limited to: The contactor will provide and install one historically accurate and appropriate 16’ x 16’ blacksmith exhibit using historical logs to match drawings provided by Red Clay State Park. Foundation to be provided by Red Clay State Park. Vendor will provide and install original top plates, ceiling joists as needed, original style roof lathing and roof rafters, siding for gable ends. Vendor will also provide hand split pressure treated cedar shake roofing, With Turkey Feather ridge, (no felt). See attached pictures of ridge cap. They will provide and install 8”x 8” sills atop foundation provided by Red Clay State Park. Provide and install one 16’ x 16’ Circa 1820 Tulip Poplar structure with flat notched corners and hand-hewn faces interior and exterior, atop sills that are resting on foundation. Provide and install 8” x 12” x 20’ Top Plates, exhibit will have 4 ft. Roof extension on double door side. Provide and install 3 approximately 4” x 8” ceiling joists overhead in interior of 16’ x 16’ room with 8ft of headroom from floor to ceiling. Provide and install approximately 4” x 4” original antique heart pine roof rafters w/collar ties. Provide and install original style roof lathing. Provide and install period type framing in gable ends. Provide and install approximately 6” wide weathered lap siding on exterior of gable ends. Provide and install cedar shake roofing same as existing buildings at Red Clay State Park, only difference is in ridge cap, “Turkey Feather Ridge” as in attached photo will be installed. Window Rough Opening approximately 38”, wooden locking shutters. Double Door Rough Opening approximately 78” x 80”, barn style plank doors.