Specifications include, but are not limited to: The manufacturer of the rescue tools shall be ISO 9001: 2015 Registered.; The powered hydraulic rescue tools shall be designed, manufactured and assembled wholly within the United States of America; The tools must be labeled by the actual manufacturer of the rescue tools with the actual manufacturer’s information and not relabeled by a secondary organization.; Pumps and tools shall operate at a minimum of 10,000 psi (690 Bar) and a maximum of 10,500 psi (724 Bar), and use a mineral based hydraulic oil.; Tool operational control shall be of a twist type handle for easy operation in any position. The control valve shall be capable of variable speed and shall contain a dead-man control for safety.; Tool housing shall be of injection molded Lexan EXL resin material, to provide high impact resistance, and excellent chemical resistance.; Battery powered SPREADER: 1. The Spreader shall have a minimum opening of 28" at the tips.; 2. Aluminum used in the construction of the Spreader body shall have an anodized finish. Spreader arms shall be aluminum. Painted or polished aluminum will not be acceptable for any part of tool.; 3. Spreader shall have a maximum spread force of not less than 56,128 lbs; Battery Powered 8" AUTO EXTRICATION CUTTER: 1. The cutter shall have a minimum blade opening eight (8"/203mm).; 2. Aluminum used in the construction of the Cutter shall have an anodized finish. Painted aluminum will not be acceptable.; 3. Cutter shall have a minimum 282,000 lbs. cutting force.