Specifications include, but are not limited to: All paints bid and supplied under this Contract shall be premium, top of the line for the paint description and will carry a label to identify it as such. Specially prepared paint or labels will not be accepted. All containers received dented or damaged shall be rejected and promptly replaced.; Bidders shall submit with their proposal, all manufacturer warranties for paints bid under this Contract. Such warranty(s) shall prevail only to the extent that they do not otherwise conflict with other contract provisions.; Paints bid for this Contract shall contain no lead or mercury products unless specifications allow for such deviations.; Each bidder must supply a current hard copy paint brush catalog and paint catalog to include Product Finishes/Supplies, with their bid. An electronic catalog must also be provided. The bid shall also include an offered discount schedule of all catalog items.; ALL PAINT BRUSHES SHALL CONFORM TO THE FOLLOWING REQUIREMENTS AS LISTED IN APPENDIX A, the Supplies tab: • FILAMENTS: Round/Solid/Tapered. See individual specification.; • BRISTLES: See each individual specification.; • HANDLES: Close grained hardwood enamel varnish or lacquer finish or non-slip resin.; o Shape of handle indicated on each individual brush specification.: • FERRULES: Non-corrosive, rust resistant. Ferrules and nails shall show no rust after 30 days at 100% RH and 73 degrees F. 0.012” thickness min. and 1-1/2” depth min. See variation for 6” WALL BRUSH.; • NAILS: 5/16” annual threaded – rust resistant. 4 nails minimum per 1 inch through 3-inch brushes and 6 nails minimum for 4 inch and 6-inch brushes.; • HOLD: Epoxy – 3/8” min. NO loose filaments or bristles.; • DIVIDERS: Wooded – Angular Sash, Flat Sash, and Enamel Brushes = 1 divider, 3- & 4-inch Wall Brushes; o = 2 dividers, 6-inch Wall Brush = 4 dividers; • TOLERANCES: “Thickness” and “Length Out” =+ or – 1/16”: o “Weight of Filament or Bristle =+10%
