Specifications include, but are not limited to: 10.1 Demo Existing Walls: a. Removal of debris; 10.2 Demo Existing Floor Coverings: a. Carpet, Cove Base; b. Proper Disposal; 10.3 Build new pony walls approx. 4’ tall: a. Frame walls using –3-5/8” Steel Studs; b. Install 5/8 drywall on both sides; 10.4 Finish New Walls: a. Tape, mud and float drywall on new walls; b. Prime and paint walls to match existing; c. Re-Finish existing walls in existing hall; d. Paint existing wood window trim, wood door trim and wood doors black; 10.5 Install New Glass storefront windows and doors in new wall to a height of approx. 8’ below ceiling Height; 10.6 New Millwork in conference room ; 10.7 Install Electrical: a. 19 - General use receptacles per design; b. 8 – Above counter receptacles in conference room; c. Reuse of existing circuits made available during demolition; d. New circuit as required; e. Back boxes and stub ups for low voltage wiring per design; f. Data back box and stub up at each office drawn; g. Data Cabling (one drop to each office and 2 drops to conference room); 10.8 Install new flooring to match existing.; 10.9 Paint entire workspace: a. including wood trim and doors; 10.10 Installation of Smartboard in Conference Room; 10.11 Installation of Overhead Projector and Screen in Conference Room
