Specifications include, but are not limited to: Design services shall include: 1.3.1 The contract for this work will be a modified ConsensusDoc 803. See link on cover page for a sample contract. 1.3.2 All design disciplines necessary to complete the scope of work. 1.3.3 Attend design kick-off meeting to discuss desired outcome of the project with the Owner, Construction Manager, and Owner’s maintenance staff. 1.3.4 Use of the State of Iowa‘s construction management software program for uploading all documents, submitting and approving pay apps, and construction administration. The cost for the use of the software is paid by the Owner. 1.3.5 At a minimum, design for construction for the following: 1.3.5.1 Remove and replace the existing driveway and provide an alternate to remove and replace the lower level parking lot (refer to the attachment per 1.4.1). 1.3.5.2 This shall include a geotechnical investigation of the soils underneath the paving and recommendations, as well as design, for any modifications based on the findings of the investigation be included. Designer is to include 3 borings at a depth of 5 feet and provide a unit cost per additional boring. 1.3.5.3 Designer is responsible for private and public utility locating during the design phase. 1.3.5.4 Designer is responsible for all survey work and shall provide control points for the selected Contractor. 1.3.6 Existing PDF drawings will be provided to the successful design firm if available. Accuracy of drawings shall be verified by the design firm. 1.3.7 Field examination of the existing buildings. 1.3.8 Design for scope of work. Provide material recommendations based on experience, quality, and price. Recommendations for replacements and upgrades shall include non-proprietary equipment and systems. 1.3.9 Designer shall include any and all survey work required for completion of project to include private utility locate. 1.3.10 Coordinate with State agencies to confirm utilities that may be abandoned as well as shut down requirements where required. 1.3.11 Provide detailed input of design schedule to Construction Manager for overall incorporation into master schedule