Specifications include, but are not limited to: Rubber content, % of Residue 10% minimum Uniformity ASTM D 2939.05 PASS Product shall be homogenous and show no separation or coagulation that cannot be overcome by moderate stirring. Viscosity, Kreb Unit (KU) ASTM D 562 35 to 65 Specific Gravity ASTM D 2939.07 Report Residue by Evaporation ASTM D 2939.08 >33.0% Flash Point, ºF (Residue) ASTM D 93 >220 Resistance to Heat ASTM D 2939.14 PASS* No sagging or slippage of film beyond the initial reference line after 212ºF exposure for two (2) hrs. Resistance to Water ASTM D 2939.15 PASS* No blistering or re-emulsification after 24 hr submersion in water. Wet Flow ASTM D 2939.19 PASS* No flow beyond initial reference line. Direct Flame Test ASTM D 2939.20 PASS* No continued combustion or slippage and run-down. Wet Film Continuity ASTM D 2939.22 PASS* A uniformly homogeneous consistency. Resistance to Kerosene ASTM D 2939.25 PASS* Report any evidence of leakage of kerosene, loss of adhesion and discoloration of tile. Wet Track Abrasion Test ISSA (TB-100) <5.0% Calculated weight loss, percentage of original volume. Accelerated Weathering Test ASTM G 154 PASS* No cracking, chipping, surface distortion or loss of adhesion. No color fading or lightening. 1000 hours UVA-340 lamp, 0.77 W/m2 (v1.0 calibration), 8 hours UV light @ 50ºC, 5 min. spray, 3:55 hours