Specifications include, but are not limited to: Rumble Strip Installation in the Towns of Acton, Alfred, Amherst, Bethel, Brookton, Chelsea, Danforth, Devereaux, Dover-Foxcroft, Edgecomb, Eliot, Enfield, Farmington, Frankfort, Gorham, Greenwood, Harrington, Hollis, Jefferson, Jonesboro, Kenduskeag, Lebanon, Leeds, Lincoln, Monmouth, Newcastle, New Gloucester, Nobleboro, North Berwick, Northport, Peru, Prospect, Rockport, South Berwick, Topsham, Wales, Weston, West Paris, Warren, Waterboro, Wayne, Wells, Whitefield, Wilton, Windsor, Winterport, Winthrop, and Woodstock, Township of TWP 22, and Cities of Auburn, Augusta, Bangor, Belfast and Sanford, Counties of Androscoggin, Aroostook, Cumberland, Franklin, Hancock, Kennebec, Knox, Lincoln, Oxford, Penobscot, Piscataquis, Sagadahoc, Waldo, Washington, and York, Maine. The Work includes construction, maintenance during construction, warranty as provided in the Contract, and other incidental work.; Rumble Strip – Edgeline and Centerline: The rumble strips will be placed along the centerline of US Routes 1, 1A, Routes 9, 111 and 196 the speed limit is greater than 45 MPH as shown on the location maps.; 1. In no-passing, double solid centerline locations, centerline rumble strips shall be continuous except for intersections.; 2. In passing zones, centerline rumble strips shall be segmented with 20 ft. of rumble strips, followed by a 20 ft. break in a repeating pattern for the length of the passing zone.; 3. Rumble strips shall not be installed on bridge decks or overpasses, or within the limits of crosswalks.; 4. Rumble strips shall not be installed adjacent across intersections. Setbacks are shown in the typical.; 5. Rumble strips will terminate where lanes separate for islands or left turn lanes.; 6. Locations where the existing shoulder is less than 5 feet wide will need to be re reviewed for safety of installation.; 7. Centerline rumble strips may or may not be the physical midpoint of the road, but should coincide with the centerline striping. Painted centerline’s should be located as best as practicable so that they are painted on the centerline rumble strips.; 8. All milled material shall become the property of the Contractor and shall be removed from the project.; 9. Any necessary cleaning of existing pavement prior to sealing shall be incidental to the related sealing items.; 10. The Contractor shall be responsible for transferring the existing striping pattern to the new surface.