Specifications include, but are not limited to: Cab and chassis: 1. Cab to axle 102”; 2. Frame rails minimum 120,000 psi yield strength, 10.125”x3.580”x.312” thickness min.. after frame max 81”; 3. Front axle 13000#; 4. Front suspension 13,000# with shock absorbers; 5. Front wheels 22.5” 10 stud hub piloted with heavy duty flange nut; 6. Front tires 11R22.5” G rating,; 7. Brake system air dual system for straight truck application; 8. Front brakes s cam actuated with outboard hubs and drums, automatic slack adjusters and long stroke chambers. 4”X15”; 9. Rear brakes to be s cam actuated with outboard drums and hubs. Quick change shoes, long stroke chambers, spring actuated parking brake and automatic slack adjusters. 7”X16.5”; 10. Air brake abs system as required by DOT; Aerial Device: The aerial device to be quoted will be the Terex XT Pro 70 ft. and the Altec LR7-60e70RM. See included specifications. The unit must have upper and lower platform controls to include engine start/stop, emergency power as well as bucket controls and auxiliary tool circuit.; Options to quote: 1. 180 degree platform rotation.; 2. LED traffic control arrow mounted in rear of vehicle.; 3. Led strobes ,Whelen Lin3 amber lights (2) mounted in front grill and one mounted (each side) on left and right sides of body. 2 Whelen L10LAP strobe lights mounted under front of cab guard each side and two Whelen 5G strobe lights mounted in rear of vehicle, each side.; 4. Tool boxes of a through box construction behind cab of truck being 35 inches wide ( aprox)and 51 inches high (aprox) X 93 Inches across (aprox) to include LED strip lighting, outer shelves must be adjustable. Three storage hooks(per side) mounted on left and ride sides of box(upper); 5. Side tool box mounted on curb side behind through box measuring 24 inches deep X 18 inches high X 72 inches long. LED strip lighting.; 6. Hydraulic tank to be mounted behind tool box.; 7. Hydraulic tool circuit at bucket; 8. Hydraulic stick saw with mounting on boom
