Specifications include, but are not limited to: The Municipality of Skagway (MOS) desires to receive proposals from qualified float manufacturers (CONTRACTOR) covering the furnishing of all materials, labor and equipment necessary to design, fabricate and supply a new, high quality, shallow draft cruise terminal float. Preliminary analysis has found that a steel, pontoon style float is likely to accommodate the site conditions. The float will be transported and installed at the MOS’s Ore Peninsula under a separate contract at a later date. The new float is shown in the accompanying technical drawings. Floats will include mounting holes/imbeds and other provisions for subsequent installation of utilities. The furnished float products will include pile hoops, transfer span connections, hand rails, 150-ton mooring bollards, allowance for vessel fendering, light poles, and other associated hardware as defined on the plans and in the technical provisions. Utility and utility mounting brackets and/or connections are required as defined on the plans and in the technical drawings. Exact locations of utility mountings will be established with MOS as design progresses. The completed float and specified equipment will be completed and delivered to the Puget Sound Region in Washington State. The float will be stored there up to 14 days until it is received by the MOS under a sperate contract to install the float.
