Specifications include, but are not limited to: The following accessories are required for installation on a 2022 Ford F-450 DRW 4-WD Supercab Chassis. Cab to axel length is 60 inches. Aftermarket Accessories to be provided and installed Work Body : Service Body Style – Knapheide or equal: 94” wide, with 54” for the bed, 20” deep compartments on each side, 40" unit height. Service body is to be at least 107” in length. Lighting: Strobes to include (2 Front strobe kits utilize the strobes integrated into the rear lights. Front strobe kit includes (2) Class I surface mount strobes and harness to tie into light harness drop point. Strobes to be amber in color. Utility light w/ 6 LED in Aluminum housing 2 Work Light Installed (1 set forward, off side of rack. 1 set rear facing on rack) 1 L10 Super Series LED Beacon - CL 2 Whelen Strobes (or equivalent) Installed Includes setting up front and rear chassis strobe system wired to factory upfitter switch. Strobes are to automatically shut off after vehicle is shifted into "Drive". Air Compressor and Tank: Chelsea Power Take off or equivalent, compressor, 40 CFM, 150 PSI minimum, installed with a remote 30 to 40 gallon aluminum tank. Tank to have remote ¼ turn drain, easily accessible, to include 200 PSI relief valve, and ¾” check valve, and sediment trap. FLUID TANKS: Tanks to be plumbed according to manufacturer’s specifications, with curb side access. 10 Gallon Aluminum Engine Oil Tank Alemite Pump RAM 5:1 stub style or (or equivalent) gun, meter regulator and ½” hose.
