Specifications include, but are not limited to: TYPICAL UNIT: ELGIN Regen X or TYMCO 600BAH mounted on MACK MD7, INTERNATIONAL MV607, or FREIGHTLINER M2-106, or State of Alaska approved manufacturer and model; provided all of the following minimum specifications are met. Any other manufacturer and model offered must be pre-approved before bid submittal.; TYPICAL UNIT: ELGIN Regen X or TYMCO 600BAH mounted on MACK MD7, INTERNATIONAL MV607, or FREIGHTLINER M2-106, or State of Alaska approved manufacturer and model; provided all of the following minimum specifications are met. Any other manufacturer and model offered must be pre-approved before bid submittal.; 101.4 Cooling System: Antifreeze: Delo Extended Life coolant RED, or compatible, and set to the protection level of minus 50 degrees Fahrenheit. The cooling system must have a drain cock for servicing the coolant. ; 101.5 Oil Filtration: Oil filter(s) to be spin-on type.; 102.0 DRIVE TRAIN: 102.1 Carrier Transmission: Allison, 2500RDS, 6 Speed. ; 102.2 (*) GVWR: 33,000 pounds minimum. ; 102.3 Front Axle, Suspension, and Steering: 102.3.1 (*) 12,000-pound minimum capacity. ; 102.3.2 Heavy-duty double-action front axle shock absorbers. ; 102.3.3 Steering to be mechanical linkage with power assist.; 102.4 Rear Axle and Suspension: 102.4.1 Single axle with dual rear wheel design.; 102.4.2 (*) 21,000-pound minimum capacity. ; 102.4.3 Ratio: Best to provide a minimum of 55 MPH travel speed and low speed sweeping. ; 102.5 Frame: 102.5.1 (*) Yield Strength: 120,000 PSI Minimum. ; 102.5.2 To be corrosion resistant E-Coat primed and painted to inhibit rust. ; 100.0 CAB: 100.1 Conventional cab configuration with left-hand drive. Dual steering positions is not acceptable.; 100.2 To be chrome yellow in color. ; 100.3 To have multiple speed wipers with washers and OEM intermittent swipe feature.; 100.4 Seats: To be air ride.; 100.5 Heater and Defroster: OEM, highest output, multi-speed adjustable heating, and window defrost. 106.0 SWEEPER ENGINE: 106.1 This sweeper system is power-driven by an auxiliary engine. The use of the chassis engine for some functions of the sweeper system is acceptable.; 106.2 The auxiliary engine shall be an electric starting, liquid-cooled, heavy-duty, 4 cylinders, turbocharged, dynamically counterbalanced, EPA Tier 4 “final” emission compliant, diesel engine.; 106.2.1 Make and Model: John Deere 4045.; 106.2.2 Minimum 74 SAE gross HP.; 106.2.3 Minimum 224-pound foot torque at 1,600 RPM; 106.3 To accommodate both easy access and sound attenuation, the engine shall be enclosed on both sides by two access doors, one on each side of the sweeper body. These doors provide access to serviceable items without tilting the hopper.; 106.4 Air Intake System(s): 106.4.1 Two-stage air cleaner, dual-element type, plus a SURECO Turbo II or ENGINAIR, or equivalent pre-cleaner. An oil bath system is not acceptable.; 106.4.2 Air to be drawn from the top or upper side of the unit to prevent excessive dust intake.; 106.4.3 To include an air filter restriction indicator and warning system located in the cab where the operator can readily observe conditions.; 106.5 Exhaust System: Muffled, vertical exhaust system.
