Specifications include, but are not limited to: Section A – 300 AMP AC/DC Diesel Engine Driven Welder General: AC/DC multi-process diesel engine driven welder, housed in a heavy gauge steel case for low noise level. Welder: Welder shall be designed for stick, TIG, MIG, and wire-feed welding applications. AC and DC constant current rated outputs shall be at least 300 amps at 32V/25 arc volts/100 percent duty cycle, with 20 to 400 amps output range. Unit shall have remote output control capability for connection of wire feeders and accessories. Engine: Welder shall be powered by a water-cooled Kubota electric start diesel engine with at least 20.2 HP and the following features: • Indicator lights for battery charging, oil pressure, and engine temperature • Engine hour meter • Automatic engine shutdown protection for low oil pressure or high coolant temperature • At least 11.5 U.S. gallon fuel capacity • Automatic engine idler • Heavy duty two-stage dry cartridge air cleaner • 12-volt battery rated at 495 cold cranking Amps • Spark arresting muffler AC Power: Welder shall be equipped with at least two 120/240-volt receptacles and at least two 120-volt GFCI receptacles. Rated AC power output shall be at least 10,000 continuous watts. Warranty/Manuals: Basic manufacturer’s warranties, to include parts and labor. Comprehensive operation, parts, and service manuals shall be supplied with each unit upon delivery. Recommended Product: Lincoln Vantage 322 and Miller Big Blue 400 Pro equipped as noted, are indicative of the type and quality required. Alternative makes and models meeting or exceeding this specification must be approved by the Department of Transportation and the Bureau of Purchase and Property prior to award.
