Specifications include, but are not limited to: Trafficware Traffic Signal Cabinet, complete, fabricated, wired and delivered, shall include all equipment, assemblies, and components to operate vehicular and pedestrian traffic signals in the state of New Hampshire. Locations of all equipment, assemblies, and components associated with the cabinets shall be submitted to NHDOT Bureau of Traffic for approval prior to fabrication. The equipment, assemblies, and components shall include the following: a) Controller Cabinet shall be a National Electrical Manufacturers Association (NEMA) P44 type and feature full sized door with police door and 7 copies of each applicable key. b) Input and output connections shall be TS2 Type 2 configuration suitable for Trafficware Commander ATC Traffic Controller. The Controller (not to be supplied as part of this order) shall rest on the top shelf of Controller Cabinet (not rack mounted). c) The MMU (Conflict Monitor) shall be the same manufacturer as the Controller. d) The Controller Cabinet front door shall be furnished with a plastic print holder mounted on the inside of the door and contain three (3) sets of prints showing all wiring. e) The Controller Cabinet shall have 2 shelves. f) 15-inch extension base shall be used.
