Specifications include, but are not limited to: Vendor shall be responsible for: Instrument Panel 1. Remove the existing Autopilot System including all wiring, mounts, and cables. Removed equipment to be returned to customer. 2. Panel, Instrument w/powder coat finish and Silkscreen labeling. 3. Remove DME and DME indicator. 4. Reposition #2 Nav Indicator (OBS) to below the HSI. 5. Remove existing Attitude Indicator 6. Furnish and Install Garmin GI 275 for Helicopters, Attitude Indicator with Synthetic Vision, and battery backup Center Pedestal/Radio Stack 1. Furnish and Install Genesys HeliSAS Bell 206L3 (2) Axis Autopilot System Kit. 2. Furnish and Install ADAHRS (Attitude and Heading Refence System) for Autopilot. 3. Furnish and Install Garmin GPS/WAAS/COM/NAV/GS – GTN 650H System, includes: a. 1 EA 010-01999-02 Receiver, Black b. 1 EA 010-2045-4X American North, SD Data Card c. 1 EA 013-00235-00 GA35 GPS Antenna d. Garmin Flight Stream 510 e. External Mark on Target (MOT) Switch 4. Furnish and Install Comant antenna – COM VHF 118 – 137 Mhz, Fiberglass whip 5. Remove Garmin 430 Other 1. Install 2 EA Garmin GSB 15, USB Type A & USB Type C 2. Complete required FAA Documentation