Specifications include, but are not limited to: Provide Security Infrastructure Systems Evaluation, Engineering, And Design Services.; a) Access Control Systems (ACS); b) Access Control and Monitoring System (ACAMS); c) Badging; d) Credentialing; e) Gates; f) Closed Circuit Television (CCTV) & Video Surveillance; g) Video Analytics and Video Management; h) Digital Video Recording and Storage; i) Voice Radio Communications Systems; j) Digital Trunked Radio System; k) Analog Conventional Radio System; l) Transmission Systems; m) Licensed Frequency; n) Other Public Safety and Security Systems; o) Mapping Existing Systems and Updating As-Builts, Network and Wiring Diagrams; The Security Consultant shall have design support responsibilities which may include, but are not limited to, the following: a) Develop schematic designs based upon the approved program, design and installation schedule and budget established during the Planning Phase.; b) Conduct field surveys of existing facilities affected by planned work and coordinate all projects with other planned or concurrent projects at the site; c) Establish the conceptual design for all components of the project by means of drawings, lists of assumptions, updated programmatic criteria, preliminary design calculations, preliminary cost estimates, and project schedules.; d) Prepare, for approval by DCAMM, design development documents consisting of drawings and other documents that describe the size and character of the entire Project.; e) Develop 60% design documents consisting of drawings and specifications, setting forth in detail the requirements for the system(s) to be installed. The 60% design documents will demonstrate agreement with the practices, policies, criteria, directives, and standards that have been adopted and approved by DCAMM for the project.; f) Develop 100% design documents satisfying all previous review comments and suitable for public bidding and implementation. The Security Consultant shall perform final quality control elements such as inter-discipline coordination, peer reviews, document and calculation checking. Any work remaining at this stage should be only minor corrections to resolve any discrepancies discovered during the final review. This design submittal shall include a construction submittal schedule that lists all items by specification section that are to be submitted by the construction contractor for review and approval.; g) Develop final design documents (Corrected Final) to include all outstanding actions and work and all review comments.; h) On occasion, architectural and engineering consultative services may be requested in support of security projects.
