Specifications include, but are not limited to: PROVERS: Shall be removed from existing chassis; one 50 gallons and one 100 gallons. To be installed, plumbed leveled (level with ground) and secured. Will be recessed 18 inches below deck. Precise location to be determined by the practicality of plumbing. Will have an open/close valve handle mounted above the deck. PLUMBING SYSTEM (PURCHASE AND INSTALL): Hose Reel: Capacity, to handle 75 feet in length x 1½ inch diameter hose, as described below. HANNAY REELS or equivalent. To be equipped with “Top” rewind. Shall be mounted rear passenger side for easy access. To include 12 volt DC, reversible, rewind motor with a sealed, explosion proof, push button operating switch and solenoid. A circuit breaker, of proper amperage, with manual reset must be included. Switch positioned so that operator can reach hose and switch simultaneously. To include rewind crank for manual rewind in case of power failure with holder clips. To include a 90 degree swivel joint. To include a 4 way hose roller assembly, corrosion resistant. To include friction brake, to control pay out speed of the reel. Outlet riser to be equipped with threaded swivel for easy hose removal.
