Specifications include, but are not limited to: GENERAL: Class 7 Conventional; Crew cab; GVWR 33,000 lbs; Front axle: 12,000 lb GAWR; Rear axle: 21,000 lb GAWR; 4 x 2; SPECIFICATION NO. 2: ENGINE & EQUIPMENT; Cummins Diesel 325 hp minimum with 750 lb-ft of torque @ 1800 rpm; Air cleaner-dry type; Engine warning / shut down including warning light and chime. Engine protection shut down must be enabled; Fuel/water separator; Oil cooler-integral; Air restriction indicator; Alternator 150 amp minimum; Single Horizontal exhaust; SPECIFICATION NO. 3: TRANSMISSION & EQUIPMENT; Allison 3500 RDS series automatic matched to engine HP and torque. Left side PTO capable with ability to drive crane, compressor and hydraulic tool circuit without overheating. PTO port must be accessible for mounting PTO with direct mount pump. Transmission shall be equipped with low oil level sensor. Pushbutton control.; Must be capable of 75 MPH highway speeds @ approximately 1800 RPM; Transmission shall be auto neutral when PTO is engaged.; SPECIFICATION NO. 4: FRONT AXLE & SUSPENSION; Tubeless radial w/11R22.5; I Beam type; 12,000 lbs rating; Parabolic Taper Leaf Shackle Type with Shock Absorbers; SPECIFICATION NO. 5: REAR AXLE & SUSPENSION; 21,000 lbs rear axle capacity; Axle ratio:4.56 - capable of 75 mph highway speeds @ approximately 1800 engine RPM; Vari Rate springs for load; Shock absorbers; SPECIFICATION NO. 6: BRAKE SYSTEM; Air brakes system; ABS; Auto drains on all tanks; Bendix AD9 air dryer with heater (no sub); Front and Rear Disc Brakes; Auto slack adjusters front and rear; SPECIFICATION NO. 7: FRAME & WHEELBASE; 120,000 psi yield steel frame; Wheelbase: 195” approximate; Cab to axle 84” approximate; SPECIFICATION NO. 8: CHASSIS EQUIPMENT; Bumper front full width steel - painted manufacturer’s standard color; (1) Boise Metal Works cone holder p/n BMW04220901 (no sub) installed on the front bumper with chassis specific hinged mounting bracket.; Two front tow hooks, one per side; Truck must have a clean frame from the back of the cab; SPECIFICATION NO. 9: FUEL TANKS & EQUIPMENT; Minimum 90 gallon fuel capacity (Fuel tank and DEF tank must be flush mount with the cab); Largest fuel capacity available without extending beyond back of cab; (2) Top Draw, Non Polished Aluminum 40 US Gallon left side, 50 US Gallon right side, mounted left and right side under cab; SPECIFICATION NO. 10: TIRES & WHEELS; (7) Heavy duty disc wheels w/11R22.5 premium grade radial tires rated for maximum allowable GVW rating for model offered; full size spare wheel and tire
