Specifications include, but are not limited to: SPECIFICATION NO.1 GENERAL Class 7 Conventional Crew cab GVWR 33,000 lbs Front axle: 12,000 lb GAWR Rear axle: 21,000 lb GAWR 4 x 2 SPECIFICATION NO. 2 ENGINE & EQUIPMENT Cummins Diesel 325 hp minimum with 750 lb-ft of torque @ 1800 rpm Air cleaner-dry type Engine warning / shut down including warning light and chime. Engine protection shut down must be enabled Fuel/water separator Oil cooler-integral Air restriction indicator Alternator 150 amp minimum Single Horizontal exhaust SPECIFICATION NO. 3 TRANSMISSION & EQUIPMENT Allison 3500 RDS series automatic matched to engine HP and torque. Left side PTO capable with ability to drive crane, compressor and hydraulic tool circuit without overheating. PTO port must be accessible for mounting PTO with direct mount pump. Transmission shall be equipped with low oil level sensor. Pushbutton control. Must be capable of 75 MPH highway speeds @ approximately 1800 RPM Transmission shall be auto neutral when PTO is engaged.
