Specifications include, but are not limited to: 3.1.1.1. All painting must be done in accordance with the paint manufacturer’s recommendations. Any variations in application must be approved in writing by a manufacturer’s representative. 3.1.1.2. All surfaces to be painted must be prepared in a workmanlike manner with the objective of obtaining a clean dry surface free from dust, dirt, debris, rust, scale, and all foreign matter. No surface should be painted before the surface meets the requirements of the paint manufacturer. 3.1.1.3. The Vendor must provide workers experienced in the installation, repair, taping, finishing, and texturing of drywall. If the Vendor exhibits an unacceptable finished product because of inadequate repairs and finishes made to drywall, the Vendor at the sole discretion of the Physical Plant’s Designated Representative, may not be included in future efforts that require such work.