Specifications include, but are not limited to: r Municipal Garage Parts Room Cabinets and Drawers for the Public Works Department. The desired equipment will be used by the Public Works Department, Municipal Garage to organize small parts and filters used to maintain the city fleet of vehicle sand equipment. NUMBER OF UNITS 7 Units SIZING Max. height to be 76” Min. width 17’ 6” Max. 18’ Depth 24” – 30” SHELVING Shelving section to be approx. 31” high 3 shelves per unit plus the fixed top of the unit All shelves to support min. 400Lbs Fixed shelf above the top drawer on all units Two adjustable shelves on all units DRAWERS Drawer banks to be approx. 44” tall Full extension drawers Capacity to be min. 450Lbs per drawer Drawer suspension to have independent lab test results for full loaded/extended drawers, included in bid submission Extruded drawer pulls to be min 75% of drawer width Drawer pulls to have provision for min. 1” labels to be installed on them Drawer pulls to have mechanically fastened end caps to prevent personal injury System to allow more than one drawer to be open at a time All drawers to have adjustable dividers that run front to back and side to side Top drawer approx. 3 7/8” tall Next drawer to be approx. 4 5/8” tall Next drawer to be approx. 5 3/8” tall Next 2 drawers to be approx. 6 1/4” tall Bottom drawer to be approx. 7” tall COLOR Blue
