Specifications include, but are not limited to: Each vehicle will have been painted black by the manufacturer and will be repainted in conformance with the color scheme below: Possess a paint application system and painting area, which meets applicable safety and environmental requirements. The application system must be able to produce a color and finish comparable to that of the original manufacturer’s finish. The base coat will be Ivy Green shall be DuPont 4814 or approved equal and the Rose Metallic shall be DuPont 7205 or approved equal. The State Agency shall supply color match samples; Vendor shall be responsible to provide exact match. All paint and clear coat products must be an approved product of the vehicle manufacturer. Each vehicle must be prepped in accordance with vehicle and paint manufacturer’s specification prior to painting. The Vendor shall remove and discard prior to painting and shall replace them with OEM replacements and install them post painting. Under hood components to be removed and reinstalled. Under trunk lid components to be removed and reinstalled. All door jams, under hood and under trunk lid to be painted Ivy Green. Rose Gold base coat to be 3/16” to ¼” under/into adjoining panels. The Chevrolet Tahoe SUV’s require the rear gate glass to be removed and reinstalled. The Dodge Durango will not require rear gate glass removal due to the permanent urethane glazing. The following items will be removed and re-installed when refinishing each vehicle; grills, headlamps, tail lamps, nameplates and emblems. The “Charger” and “AWD” emblems located on the trunk lid, are not to be re-install once paint completed. Each vehicle shall be painted in a downdraft spray booth capable of baking the base/clear coat finish for a minimum of 30 minutes upon reaching a surface temperature of 140 degrees
