Specifications include, but are not limited to: Contractor will provide & install a coil repair kit into a steam generator. The generator has been partially taken apart/pipes have been disconnected.; Vapor Power Steam Generator, Model: TRG-5907-SHK-200-LN, Installed Jan 2011, Serial # 23777: 5.1 Provide one (1) new replacement coil repair kit for the steam generator. This includes one (1) combustor coil and (3) rear coils and all materials/supplies necessary for a complete coil replacement for the unit.; 5.2 Install all new coils in the unit following all the OEM specifications and instructions. Re-connect all boiler external piping which has already been disconnected.; 5.3 The unit shall be hydrostatically tested to insure no leakage. The hydro test shall be witnessed by a National Board Commission Inspector holding a State of Iowa Boiler license. R Stamp Code paperwork will be completed and filed with the State of Iowa Boiler Department. ISD will receive a copy of this paperwork for their files.; 5.4 Install all new refractories that were removed to allow for the installation of the new coils.; 5.5 Cure out all new refractories, as necessary.; 5.6 Close steam generator for operation.; 5.7 Clean all work areas.