Specifications include, but are not limited to: RIGID MOUNT WASHER, UNIMAC UWT065D4 or Equivalent – Quantity 1 • Must be 65 lb capacity • Quote should be for simplest, most manual controls which are easiest for resident operators to use • Width must not exceed 35 in • Depth must not exceed 52 in • Height must not exceed 65 in • Must have rigid mount • Electrical must be 208/240v, 60hz, 3 phase • Must have a minimum 30 in cylinder diameter • Must have a minimum door opening of 17 in • Must have a minimum cylinder volume of 9.7 cu ft • Must have a ¾ in (19mm) water inlet connection • Must have a ½ in (13mm) steam connection • Must have a 3 in drain valve • Must have a minimum 300 G Force extraction • Must have a minimum 5 HP drive motor • Must have a minimum warranty of 5 years on frame, cylinder, and shell • A live use-of-equipment training session must be provided immediately following the installation for 1 laundry officer and 1 maintenance technician. Contractor must provide training time of up to 60 minutes. • Delivery with liftgate and installation must be included in the price quoted. Contractor must deliver the washer within 90 days from date of award and complete the installation within 2 working days after delivery. Earlier delivery and installation is preferred. Delivery must occur on a date to be mutually determined by IDOC Maintenance and the Contractor. GAS DRYER, UNIMAC UT075DN or Equivalent – Quantity 1 • Must be 75 lb capacity • Quote should be for simplest, most manual controls which are easiest for resident operators to use • Width must not exceed 39 in • Depth must not exceed 53 in • Height must not exceed 78 in • Must have fire suppression • Must run on natural gas • Must be 110V, 50-60 Hz, 1 phase • Must have a minimum 37 in cylinder diameter • Must have a minimum 22 cu ft basket volume • Must have air outlet of 8 in • Must be minimum of 165,000 BTU/hr heat input • Must have minimum of 800 cfm airflow • Must have minimum warranty of 3 years parts, 90 days labor • A live use-of-equipment training session must be provided immediately following the installation for 1 laundry officer and 1 maintenance technician. Contractor must provide training time of up to 60 minutes. • Delivery with liftgate and installation must be included in the price quoted. Contractor must deliver the dryer within 90 days from date of award and complete the installation within 2 working days after delivery. Earlier delivery and installation is preferred. Delivery must occur on a date to be mutually determined by IDOC Maintenance and the Contractor.