Specifications include, but are not limited to: 2. ENGINE ITEM ITEM DESCRIPTION COMPLIANCE A. Type: Minimum four (4) cylinder turbo charged intercooled tier 4 engine yes no B. The engine shall have a dual element air cleaner. yes no C. The machine shall have an air intake heater. yes no D. The engine emissions solution shall incorporate the latest Tier 4 Final emissions technology which captures particulate matter by utilizing a wall flow filter design. yes no E. The machine shall limit engine RPM until specified engine operating temperature is attained to protect the engine from premature wear due to cold weather. yes no F. The machine shall have a minimum of 74 gross horsepower (ISO 14396) Horsepower of machine bid: ________________@ RPM __________________ yes no G. The machine shall have a peak torque rating of 207 ft/lbs. of torque per Torque - _________________ @ __________________RPM yes no H. The unit shall include a variable speed demand fan with reversing functionality. yes no 3. PERFORMANCE ITEM ITEM DESCRIPTION COMPLIANCE A. SAE Rated operating capacity 35% of tipping load : minimum 2590 lbs. SAE Rated operating capacity of machine bid: ________________________ yes no B. Tipping Load: minimum 7,400lbs. Tipping load of machine bid: _____________________________ yes no C. Lift breakout: minimum 5,200 lbs. Lift breakout of machine bid: ____________________________ yes no D. Bucket breakout: minimum 6,000 lbs. Bucket Breakout: - ________________________ yes no E. Operating weight: minimum 9,500 lbs. Operating weight of machine bid: __________________________ yes no F. The machine shall have a two (2) speed transmission. yes no G. The machine shall be equipped with speed management / creep control. yes no 4. FUEL ITEM ITEM DESCRIPTION COMPLIANCE A. Fuel type: diesel yes no B. The machine shall have a minimum of a 21-gallon fuel tank. Fuel Capacity on machine bid: _________________________ yes no 5. HYDRAULICS ITEM ITEM DESCRIPTION COMPLIANCE A. The machine shall have a minimum of 3450 PSI hydraulic pressure. Hydraulic pressure of machine bid: _______________________ psi yes no B. High flow hydraulics shall be capable of providing a minimum thirty -two (32) GPM GPM of high flow bid: __________________________________ yes no C. High flow hydraulic horsepower: minimum 64 HP. High flow hydraulic horsepower bid: ________________________ yes no 6. DRIVE SYSTEM ITEM ITEM DESCRIPTION COMPLIANCE A. The unit shall include a two-speed drive system. yes no B. The track tenson shall be adjustable. yes no C. The rubber tracks shall include steel cables and embeds. yes no D. The unit’s parking brake shall be spring applied, pressure release multi-disk brake. yes no
