Specifications include, but are not limited to: Contract Items and Mandatory Requirements: Vendor shall provide Agency with the Contract Items listed below on an open-end and continuing basis. Contract Items must meet or exceed the mandatory requirements as shown below. Mattress/Shower Curtain Ticking Fabric Must be Sure-Chek Clear Chek or equal. Must be 10.5 ounces per square yard. Base material must be 1000 denier polyester scrim. Must meet or exceed all legal requirements for covering fabrics used in the manufacturing of bedding and shower curtain products. Must be compatible with FR neoprene and HR foams, antimicrobial, hypoallergenic, resistant to delamination, constructed with no-penetrable surface, fire retardant-Flame 16 CFR 1632 Class A, antifungal. Must have a minimum tensile strength of 160 pounds per inch warp and 145 pounds per inch fill. Must have a minimum tear strength of 90 pounds warp and 105 pounds fill. Must have a minimum hydrostatic burst of 230 PSI. Must be 82” wide. Must include one mattress ticking product tag per yard. Packaging must be in individual rolls of no more than 100 linear yards each. Must be made in the USA. Mattress/Pillow Ticking Fabric Must be gray in color. Must be 10 ounces per square yard. Must meet or exceed NFPA 702 standard for flame resistance. Must antimicrobial and hypoallergenic. Must be resistant to delamination and constructed with non-penetrable surface. Must have a minimum tensile strength of 110 pounds per inch warp and 95 pounds per inch fill. Must have a minimum tear strength of 15 pounds warp and 25 pounds fill. Must have a hydrostatic burst of 190 PSI. Must be 50” wide. Packaging must be individual rolls of no more than 100 linear yards per roll. Must include two pillow product tags per yard. Must be made in the USA. Mattress/Pillow Ticking Fabric Must be light blue in color. Must be 6 ounces per square yard. Must meet or exceed NFPA 702 standard for flame resistance. Must be antimicrobial and hypoallergenic. Must be resistant to delamination and constructed with non-penetrable surface. Must have a minimum tensile strength of 90 pounds per inch warp and 65 pounds per inch fill. Must have a minimum tear strength of 8 pounds warp and 11 pounds fill. Must have a hydrostatic burst of 130 PSI. Must be 54” wide. Packaging must be individual rolls of no more than 100 linear yards per roll. Must include two pillow product tags per yard. Must be made in the USA. Mattress Ticking Fabric Must be Sure-Chek 44 or equal, green in color. Must be 12 to 12.5 ounces per square yard. Must be 3-ply vinyl laminate to be polymeric on both sides. Base fabric must be reinforced by 9x9 rows of 1000 denier polyester WIWK open-weaver scrim per square inch. Must meet or exceed all legal requirements for covering fabrics used in the manufacturing of bedding products. Must be compatible with FR neoprene and HR foams, fire retardant-Flame 16 CFR 1632 Class A, antimicrobial and antifungal. Must have a minimum tensile strength of 210 pounds per inch warp and 190 pounds per inch fill. Must have a minimum tear strength of 100 pounds warp and fill. Must have a minimum hydrostatic burst of 350 PSI, REACH compliant. Must be 82” wide. Must be CoC-Lot tested by ISO Certified facility prior to shipping. Must be made in the USA. Must include one mattress ticking product tag per yard. Packaging must be in individual roll of no more than 100 linear yards per roll. Mattress Ticking Fabric Must be Sure-Chek XL or equal, sand (tan) in color. Must be 11 to 11.5 ounces per square yard. Must be reinforced 3 ply vinyl laminate to be polymeric on both sides. Base fabric must be reinforced by 18x9 rows of 220/500 denier polyester WIWK open-weaver scrim per square inch. Must meet or exceed all legal requirements of covering fabrics used in the manufacturing of bedding products. Must be compatible with FR neoprene and HR foams, fire retardant Flame 16 CFR 1632 Class A, antimicrobial and antifungal. Must have a minimum tensile strength of 100 pounds per inch warp and fill. Must have a minimum tear strength of 15 pounds per inch warp and fill. Must have a minimum hydrostatic burst of 160 PSI, REACH complaint. Must be 82” wide. Must be CoC Lot tested by ISO Certified facility prior to shipping. Must be made in the USA. Must include one mattress ticking product tag per yard. Packaging must be individual rolls of no more than 100 linear yards per roll. Linen Ticking Fabric Available colors must be translucent, mauve, light blue and fawn. Must be 8.5 ounces per square yard. Must meet or exceed NFPA 701 standard for flame resistance. Must be resistant to delamination and constructed with non-penetrable surface. Must be antimicrobial and hypoallergenic. Must have a minimum tensile strength of 129 pounds per inch warp and 112 pounds per inch fill. Must have a minimum tear strength of 32 pounds warp and 36 pounds fill. Must have a hydrostatic burst of 182 PSI. Must be 72.5 inches wide. Must include one mattress ticking product tag per yard. Packaging must be individual rolls of no more than 100 linear yards per roll. Must be made in the USA.