Specifications include, but are not limited to:General 1. Must be 8 years old or newer model EPA Final Tier 4 ____ ____ ________________________ 2. Model JD 772GP, Cat 140AWD/150AWD or similar ____ ____ ________________________ 3. Shall be bid with all standard equipment and include any optional equipment required ____ ____ ________________________ 4. The rear frame shall have two box section channels with an integrated bumper ____ ____ ________________________ 5. Rear hitch with pin shall be provided ____ ____ ________________________ 6. Shall have removable front and rear fenders ____ ____ ________________________ 7. Equipment should not come with any rear attachments (i.e., scarifier, roller, compactor) ____ ____ ________________________ 8. A standard rear hitch shall be provided ____ ____ ________________________ 9. Must be equipped with front push block for weight ____ ____ ________________________ 10. Must be 100% full of fuel upon delivery (and will be returned full) ____ ____ ________________________ 11. Equipment must be delivered without wing blades and mold board blades ____ ____ ________________________ Power Train 1. Transmission shall be direct drive power shift type ____ ____ ________________________ 2. Must have at lease (8) eight forward speeds ____ ____ ________________________ 3. Must have at least (6) reverse speeds ____ ____ ________________________ 4. Transmission shall be load sensing electronic shifting ____ ____ ________________________ 5. Shall have operator controlled differential lock-unlock 6. Final drive shall be planetary design ____ ____ ________________________ Weight 1. The minimum base operating weight shall not be less than 42,647 lbs. per manufactures printed specification with full fuel and lubricants ____ ____ ________________________ Steering 1. Shall be power assisted, with fore and aft adjustable console with tilt-able steering wheel/dual joysticks ____ ____ ________________________ 2. Shall have articulation indicator and locking device for articulation ____ ____ ________________________ 3. Push button return to center auto articulation ____ ____ ________________________ 4. Shall have large steering stops at each wheel and steering cylinder relief valves ____ ____ ________________________ 5. Blade flip (single button to flip/mirror the blade to the other side) ____ ____ ________________________ Circle 1. Shall be hydraulic driven with 360-degree rotation with positive lock ____ ____ ________________________ 2. Must have replaceable wear inserts ____ ____ ________________________ 3. Premium circle when available or circle slip clutch
