Specifications include, but are not limited to: Aluminum Coil Stock (Trim): Furnish and install aluminum stock (0.019" thick). Apply coil stock smoothly in accordance with the manufacturer's recommendations. Caulk all seams and edges.; Basement (Bulkhead/Hatchway) Doors: Furnish and install [steel sided basement door] [steel basement door mounted to existing sloped masonry sidewalls]. Repair/replace existing masonry as needed. Replacement doors to be Bilco, Gordon Corporation, or approved equal. Install and finish basement door in accordance with the manufacturer's specifications.; C. Carpeting (Wall to Wall): Remove and dispose of carpet and padding. Furnish and install carpeting that bears the Carpet and Rug Institute (CRI) Green Label Plus relative to chemical emissions.; Additional Guidance: If possible, avoid replacement with carpet. Evaluate underlying floor for suitability for refinishing or install alternative floor covering.; D. Doors (Exterior): Unless otherwise noted, exterior doors shall be 1-3/4 thick 24 gauge thermally broken galvanized and bonderized steel insulated core doors, with adjustable sills, magnetic weather stripping, and 1 1/2 pair 3 1/2 x 3 1/2 loose pin butt hinges.