Specifications include, but are not limited to:1.1 Cummins L9 turbocharged diesel engine, 360 HP / 1150 torque with current Tier level requirements. SCR is required. Specify HP and torque ratings; 1.2 Full flow oil filter; 1.3 Magnetic crankcase drain plug; 1.4 Cummins 18.7 CFM air compressor with internal safety valve; 1.5 Cummins exhaust brake integrated with VGT and dash mounted on/off switch; 1.6 Electronic engine integral shutdown protection system; 1.7 12V 160 amp 28-SI Quadramount alternator with remote battery volt sense; 1.8 Two (2) 2,000 CCA threaded stud batteries frame mounted, left side back of cab; 1.9 Left hand frame mounted back of cab vertical aftertreatment and exhaust system with curved top stack, 10’ 6” minimum height.; 1.10 Aluminum after treatment heat shields; 1.11 Engine after treatment with both active and manual regeneration with appropriate dash mounted switches; 1.12 Automatic cooling fan control without dash switch; 1.13 1,100 sq. in. aluminum radiator; 1.14 Anti-freeze to -34F, OAT extended life coolant; 1.15 Heavy duty silicone or Blue Stripe coolant hoses; 1.16 Constant tension hose clamps for coolant hoses; 1.17 Radiator drain valve; 1.18 Lower radiator guard; 1.19 Aluminum flywheel housing; 1.20 Electric air intake warmer; 1.21 12V HD starter with integrated magnetic switch; 1.22 1,000-watt 115-volt electric engine block heater; 1.23 Spare service filters to include oil filter, fuel filter(s) and air filter(s)