Specifications include, but are not limited to: 1.0 DELIVERY: 1.1 Pre-delivery service: Prior to delivery, each vehicle, piece of equipment or attachment shall be serviced and inspected by the dealer or his agent. Inspection must include the following (as applicable to the type of equipment): 1.1.1 Dealer and vehicle identification. 1.1.2 Check-off of service and inspection performed including a list of all fluids including type weight and specification that are in the equipment as delivered for all fluid compartments. 1.1.3 The vehicle's crankcase, differential and transmission, and other fluid compartments shall be filled to the manufacturer's recommended capacity. 1.1.4 Fuel tank shall be filled to at least register a minimum ¼ full on the fuel gauge, unless restricted by the commercial carrier, when the vehicle arrives at the delivery location. 1.1.5 The vehicle shall be clean and free from defects when delivered and should be ready for immediate and continued use upon delivery. 1.1.6 Units delivered in an incomplete state, or which have deficiencies per the specification, are subject to the damage charges as noted in paragraph 76.0 below. 1.2 Inspections: 1.2.1 The State's inspection of all materials and equipment upon delivery is for the sole purpose of identification. Such inspection shall not be construed as final or as acceptance of the materials or equipment if materials or equipment do not conform to Contract requirements. If there are any apparent defects in the materials or equipment at the time of delivery, the State will promptly notify the Contractor thereof. Without limiting any other rights of the State, The State at its option, may require the Contractor to: 1.2.1.1 repair or replace at contractor's expense, any or all of the damaged goods, 1.2.1.2 refund the price of any or all of the damaged goods, or 1.2.1.3 Accept the return of any or all of the damaged goods. 1.2.2 Costs of remedying all defects, indirect and consequential costs of correcting same, and/or removing or replacing any or all of the defective materials or equipment will be charged against the bidder.
