Specifications include, but are not limited to: the purchase and installation of work truck canopies (Canopies); The canopies must be the latest model of the manufacturer's current standard production, as offered to commercial trade. Though they are not specifically covered herein, all parts necessary to provide complete and functional canopies must be furnished. All parts must conform in design, strength, quality of materials, and workmanship to current engineering practices and accepted standards of the industry. All parts must be the manufacturer’s standard unless otherwise specified in this RFQ. ; Electrical Circuit Breakers All electrical components must be protected by a fuse or resettable circuit breakers utilizing a dedicated receptacle. Receptacle must be a National Electrical Manufacturers Association (NEMA) https://www.nema.org/pages/default.aspx 6P rated weatherproof and located in an accessible area. Wiring Must not be spliced without utilizing weather pack connectors. Must be securely fastened and located away from all pinch points. Must be clamped and held in place using stainless steel rubber-insulated, bolt-on cushion clamps. Passing through bulkheads must be protected with either rubber or neoprene bulkhead wire protectors and/or body grommet type insert. Must be run in chemical resistant looms. Must have wire identification every 6 in. Striped wire of assorted colors is acceptable. ; o be installed on ITD owned vehicle - One (1) 2022 Ford F150 XL, 4WD Extra cab, long bed – 8 ft ITD vehicle number T03906. LEER DCC or equal, (Commercial Cap) standard cab height. Color – Ford Oxford white. Interior – standard. Rear door – half (1/2) rear door. (with window) Side doors – full length, solid (no windows) Toolbox – both sides, one (1) flat shelf each. Front window – clear, mitered picture window.
