Specifications include, but are not limited to: 1. ITD Truck Models & Installation A. Truck Models 1. Item 1 – One (1) New 2022 Ford F350 4WD SRW Cab and Chassis, gas (ITD# T03232) District 2 a. Flatbed with storage box on curb side. 2. Item 2 – Two (2) New 2022 Ford F-350 4WD DRW Cab and Chassis, gas (ITD# T03813, T03814) District 4 (See Attached Diagram) a. Flatbed bodies with Storage boxes on curbside. b. Slip Tank and Fuel Reel. c. Arrow Board. d. D Rings. e. Anderson Jumper Plug. 2. Electrical A. Circuit Breakers 1. All electrical components must be protected by circuit breakers. OE circuit breakers must be utilized if provided. B. Wiring 1. Must not be spliced without utilizing weather pack connectors. 2. Must be securely fastened and located away from all pinch points. 3. Must be clamped and held in place using stainless steel rubber-insulated, bolt-on cushion clamps. 4. Passing through bulkheads must be protected with either rubber or neoprene bulkhead wire protectors and/or body grommet type insert. 5. Must be run in chemical resistant looms. 6. Must have wire identification every 6 in or one solid color per wire. Striped wire of assorted colors is acceptable. Wiring of all the same color is not acceptable.
