Specifications include, but are not limited to: Geotextile 10 oz. Non-woven geotextile - See specifications in Exhibit A 1 Nonwoven separation geotextile (15' x 300' rolls) SF 153,000 2 Shipping EA 1 Drain Gravel Drain Gravel - See specifications in Exhibit A 3 Drain Gravel CY 2,547 4 Shipping LS 1 HDPE Pipe Polyethylene resin shall meet or exceed requirements of ASTM F2619 for PE 4710 material with cell classification of 4 or higher. Pipe shall conform to requirements of ASTM F714. Diameter Basis shall be IPS. Pipe joint lengths as given. See HDPE Pipe Perforation specifications in Exhibit A 5 4" HDPE SDR 11 Solid; Shipped in 40-foot joint length FT 680 6 4" SDR 9 Perforated w/ 1/2" holes at 180° @ 10-foot ctr [5' from ends]. Shipped in 40-foot joint length FT 4,080 7 6" HDPE SDR 11 Solid; Shipped 40-foot joint length FT 640 8 6" HDPE SDR 11 Perforated w/ 1/2" holes at 90° @ 6-inch ctr; rotate each row 45°; Shipped in 40-foot joint length FT 2,120 9 10" HDPE SDR 11 Perforated w/ 1/2" holes at 90° @ 6-inch ctr; rotate each row 45° ; Shipped in 40-foot joint length FT 1,520 10 Shipping LS 1 HDPE Thermal Butt Fusion Fittings Polyethylene resin shall meet or exceed requirements of ASTM D3350 for PE 4710 material with cell classification of 445474C. Fittings shall have same or higher-pressure rating as pipe. Fittings shall conform to requirements of ASTM F714. FM Approved preferred. Diameter Basis shall be IPS. Fitting Tees, Wyes, and Reducers may be fabricated or injection molded. Fitting 11 4" HDPE SDR 17 Butt Fusion End Caps EA 2 12 10" HDPE SDR 11 Butt Fusion Tee EA 4
