Specifications include, but are not limited to: Materials, labor, and installation of approximately 818 LF of 6'h chain link fence with barb wire including 1- 5'w single swing gate, 1- 22'w double swing gate, 1- 17'w manual aluminum slide gate, and 1- 20'w operated aluminum slide gate. This will include the electric to the gates. This will be fully operational when job is completed. Conduit has been run for one of the sliding gate operators.; Terminal posts- 2-1/2" OD SS40 black vinyl coated pipe; Line posts- 2" OD SS40 black vinyl coated pipe; Top rail and bracing- 1-5/8" OD SS40 black vinyl coated pipe; Bottom tension wire- 7ga coil wire black vinyl coated; Barb arms- pressed steel 45 deg 3 strand black vinyl coated, wire to terminate on extended terminal posts; Barb wire- Class III black vinyl coated 4pt 5" OC; Fabric- 2"x9gax72" black vinyl coated class 2b fused 8ga finish; Single swing gate posts- 3" OD SS40 black vinyl coated pipe; Single swing gate frame- 1-5/8" OD SS40 black vinyl coated pipe fully welded, mesh to match fence.; Single swing gate hardware- NON SELF CLOSING box hinges, mechanical push pin combo lock lever handle with welded lock box, free exit.; Double swing gate posts- 4" OD SS40 black vinyl coated pipe; Double swing gate frame- 2" OD SS40 black vinyl coated pipe fully welded, mesh to match fence.; Double swing gate hardware- industrial offset hinges and industrial locking device.; Slide gate posts- 4"OD SS40 black vinyl coated pipe; Slide gates- 17'w and 20'w aluminum cantilevered slide gate, full welded aluminum frames, operated gate to be wired through tail for UL 325.; Slide gate hardware- 8 wheel truck assemblies, truck mounting brackets, bottom guide rollers, yoke latch.; Slide gates to be powder coated black.; All posts set 36" deep in full concrete footers.