Specifications include, but are not limited to: a. All coatings required for newly constructed and existing sheetrock, terra cotta or plaster walls and ceilings will be the current State of New Hampshire standard; Benjamin Moore Brand "Ultra Spec 500" coatings, low Volatile Organic Compounds (VOC); Sherwin Williams Brand “Pro Mar 200”; Pittsburgh Band “Manor Hall”, or equivalent, as determined by State Project Manager or his/her designee; b. The State of New Hampshire standard used for all block walls; Benjamin Moore Brand "Ultra Spec 500"; Sherwin Williams Brand “Pro Mar 200”; Pittsburgh Brand “Manor Hall”, or equivalent, as determined by the State Project Manager or his or her designee. c. The State of New Hampshire standard used for all exterior siding and trim; Benjamin Moore Brand "ben"; Sherwin Williams Brand “Superpaint”; Pittsburgh Brand “Sun Proof”, or equivalent, as determined by the State Project Manager.; 2. Coating Preparation a. The Vendor(s) shall perform the preparation of all surfaces for coating, including, but not limited to the following: sheetrock walls, terra cotta and plaster walls, previously prepared walls (vinyl and paper wall covering), exterior siding and trim, masonry surfaces, concrete block walls, steel and wood doors, steel door frames, etc.
