Specifications include, but are not limited to: Capacity: Rated payload shall be at least 60,000 pounds; Deck: Deck length shall be a minimum of 24’ long with a 5’ beavertail section, deck width shall be 102” and flooring shall be constructed of 2” (+/- 0.25”) nominal oak planks. Deck height shall not exceed 35” when loaded, must be equipped with a minimum of 24 (12 per side) “D-ring” style tie downs.; Suspension: H9700 adjustable suspension, the first axle shall be air lift and air ride equipped, second and third may be spring ride.; Ramps: Shall be a minimum of 30” wide and 60” long and must be air or hydraulic actuated.; Hitch and Landing Gear: Adjustable 3’ ID forged Pintle eye, Safety chains shall be constructed of at least ½” high test chain with equivalent hooks with latches. Landing gear shall be of a dual drop leg design equipped with a 2-speed mechanical jack. A lockable storage compartment with document holder should be included in the drawbar area.; Tires, rims and axles: Tires shall be a 235/75/17.5 of Radial design and must have a minimum 16-ply load rating. Rims shall be of steel construction and shall be hub piloted.; Brakes: Air brakes with ABS, must be a minimum 2S/1M design.; Lights: Shall be of a sealed, 12-volt LED design, and must be DOT approved. 7 Way connector shall be provided.; Finish: Manufacturer’s standard color, must include reflective tape on sides and rear.
