Specifications include, but are not limited to: Pavement Markings for Runway 11/29, taxiways, and apron for the Kake airport; SOLVENT BASED TRAFFIC MARKING PAINT LOW VOC IN WHITE, YELLOW, BLACK, BLUE, AND RED: All paint provided under this specification must meet the requirements stated in this appendix and/or meet the requirements of Federal Specification A-A-2886B, Type II, and be formulated with a minimum of 70% Acrylic Copolymer resins.; A. Pigment Composition: Pigments shall be first quality paint grade pigments. The inert or filler pigments must be of a type and quality generally recognized as first quality paint grade products, and shall not contribute to settling of the paint in storage or be so hard as to cause excessive wear of the spray application equipment.; B. Vehicle or Resinous Binder Composition: The vehicle may be any combination of natural or synthetic resinous materials that are not prohibited per this specification. All resins used must be permanently capable of re-dissolving in the solvent combination used in the paint. Paint and binder combinations shall minimize build-up of the paint on the sides of tanks, paint lines, and clogging of spray equipment from un-dissolvable skins.; C. Prohibited Materials: The manufacturer must submit documentation certifying the product does not contain mercury, lead, hexavalent chromium, halogenated solvents (such as Methylene Chloride), or any carcinogen, as defined in 29 CFR 1910.1200.; D. Application and Storage: Follow Manufacturer’s recommended equipment, temperatures, humidity and any other limits for safe and proper application, use, as well as storage of these materials and containers.; E. Condition in Container: For a minimum of one year from the date of manufacture, the paint must meet each of the following conditions: (1) Not show excessive settling in a freshly opened full can; (2) Show no curdling, livering, caking, lumps, skins, or color separation; (3) Be easily re-dispersed when mixed with a paddle; (4) Be easily re-dispersed after 5 minutes of mechanical shaking using a standard commercial paint shaker; (5) Water Resistance: Guaranteed water resistant when applied properly.
