Specifications include, but are not limited to: Inspect and service for start-up; Check and connect gauges and check for pressure; Record liquid line and suction line pressures; Check units for Freon leaks; Check indoor and outdoor coils for cleanliness; clean coils if needed; Test motor amp draw; Record temperature differential across evaporator coil; Check evaporator suction line temperature; Check low ambient dampers for proper operation; Check condensing unit; Check air handler; Check pre-cooler pads if applicable\; Inspect piping system components for leakage and damage; Inspect thermostats; Check dampers for open position; Check setting and function of each control; Inspect condition od compressors, condensate and control contactors; Lubricate all moving parts; Check belts id applicable; Check pressure cutout settings; Check start capacitors and potential relays when applicable; Check compressor contactors; Check all wiring and connections; Check condenser soils; Check condensate drain operations
