Specifications include, but are not limited to: A. Clear and remove all overgrown vegetation that is within two (2) feet of fence line. B. Furnish and install approximately 200 feet of new 9 gauge galvanized, 6 feet high chain link fence with privacy and protection slats (color will be determined by the Division commander) and razor wire material. C. Fence will have two pedestrian gates with keypad entry and one large sliding gate with automatic gate opener and keypad. Locations to be determined at bid walk. D. Install line posts every 6 feet on center, 2-7/8” Schedule 40 set in 12” x 48” footing. E. Top and mid rail to be 1-5/8” Schedule 40. F. Install bottom tension wire 9 gauge smooth. G. On existing wooden fence, install 2-feet high framed lattice privacy screening on approximately 192 feet. H. Maintain a safe working environment to prevent injuries to CHP personnel or damage to CHP property. I. Contractor, at no expense to the State of California, will repair any damage caused by the Contractor or any of his/her employees. J. Contractor must field verify all measurements encompassed in this project and is solely responsible for their accuracy. K. Contractor will keep the work site clean and haul away any work site debris on a daily basis. Removed material must be recycled where possible. L. Warranty all parts and workmanship for a period of one (1) year. Contractor to supply the manufacturer’s warranties and manuals for any parts used in this project.
