Specifications include, but are not limited to: 2. A pre-installation site evaluation shall be completed by the Supplier to identify any site issues that may need to be addressed above and beyond the items in this contract.; 3. Removal and disposal of the existing PVC liner up to the joint where the pool liner meets the gutter liner (about 3 inches into the gutter system). (See Fig. 1).; 4. When removing the old pool liner, to remove all floor mounted plastic inlet diffusers and replace with new ones plus provide 30 extra diffusers to keep for when the new ones are damaged over the winters.; 5. When removing the old pool liner, to save & reinstall with the new liner the (4) Neptune-Benson Aegis 30x30 VGB rated main drain covers and (4) metal drain grate adaptors – these drain grates are marked as eligible for use until 2025.; 6. Broom clean pool basin floors and walls to remove dirt and debris. Prepare pool basin floors and walls as required to ensure a sanitary environment and watertight installation.; 7. All pool penetrations shall be terminated with compression flanges or other parts necessary to make a complete watertight installation. Extra flanges and other parts necessary for maintaining the watertight installation shall be provided for future onsite repairs by the City.; 8. Apply adhesive as required according to liner manufacturer’s specifications.; 9. Replacement liner shall be minimum of 60 mils (1.5 mm) thickness.; 10. Complete additional perimeter caulking, details work, and finish work to make a complete watertight installation.