Specifications include, but are not limited to: 101.0 CHASSIS: 101.1 Chassis will be Ford F450, W4H, 15,000 lb. GVWR. with gasoline engine.; 101.2 Chassis has 84 inch Cab-to-Axle.; 101.3 (*) Chassis will be direct shipped to the installer from Ford. Please provide drop-ship code: ; 102.0 BODY: 102.1 Tapered panel body design. ; 102.2 Body Length: 130-134 inches.; 102.3 Interior Clear Height: 72-78 inches. ; 102.4 4 cargo tie-downs inside the cargo area. D-ring type with 6,000 lbs. capacity, minimum. If mounted in walking area, shall be flush mount design.; 102.5 Shall include vice mount on right side (curbside) of bumper. ; 102.6 Rear access shall include hand holds on left and right side inside door.; 102.7 Class V receiver hitch. ; 102.8 Roof vent with fan and crank up weather cover. ; 103.0 COMPARTMENTS: 103.1 All doors shall have seals to prevent dust and moisture intrusion. ; 103.2 All hinges must be aluminum or stainless steel and continuous. ; 103.3 Vertical doors shall include a spring or gas mechanism to prevent involuntary swing. ; 103.4 Compartments shall be approximately 20 inches inside depth. ; 103.5 Master locking system to allow one entire side of compartments to be locked with a padlock. Electronic key fob design would be acceptable.