Specifications include, but are not limited to: General: AC/DC multi-process diesel engine driven welder mounted on a single axle trailer. Welder shall be housed in a heavy gauge steel case for low noise level.; Welder: Welder shall be designed for stick, TIG, MIG, and wire-feed welding applications. AC and DC constant current rated outputs shall be at least 300 amps at 32V/25 arc volts/100 percent duty cycle, with 20 to 400 amps output range. Unit shall have remote output control capability for connection of wire feeders and accessories.; Engine: Welder shall be powered by a water-cooled Kubota electric start diesel engine with at least 20.2 HP and the following features: • Indicator lights for battery charging, oil pressure, and engine temperature; • Engine hour meter; • Automatic engine shutdown protection for low oil pressure or high coolant temperature; • At least 11.5 U.S. gallon fuel capacity; • Automatic engine idler; • Heavy duty two-stage dry cartridge air cleaner; • 12-volt battery rated at 495 cold cranking Amps; • Spark arresting muffler; AC Power: Welder shall be equipped with at least two 120/240-volt receptacles and at least two 120-volt GFCI receptacles. Rated AC power output shall be at least 10,000 continuous watts.
