Specifications include, but are not limited to: Cleaning Toilet Rooms - This work includes cleaning all plumbing fixtures, lavatories, toilet bowls, dispensers, light fixtures, exhaust fan fixtures, doors, and stall partitions as required, and filling all paper/soap dispensers as needed. Floors shall be dry-swept and damp mopped daily using a germicide.; Sweeping - All tile, wood, or concrete floors, stairways, landings, and stoops shall be swept with brush or mop or mechanical brush-vacuum sweeping without damage or disfigurement of furniture, doors, or base trim. Dust, dirt, and debris shall be removed. Reset furniture upon completion of sweeping.; Vacuuming - Carpeting and furniture shall be vacuumed and the dirt, dust and debris removed. Spots shall be removed from rugs and carpets as they occur.; Carpet Shampooing - Carpeting shall be cleaned by self-contained equipment using cleaning solution.; Damp Mopping Floors - Damp mop all resilient tile floors, ceramic tile, and concrete floors, including stairs and landings, using cotton or sponge mops, appropriate stain removal agents, and heated water, detergent and/or germicide.; Floor Scrubbing - Scrub floors by use of deck brush, cylindrical or disc type machine or automatic machine scrubber and detergent solution. This scrubbing will be followed by the application of a floor finish system applied in accordance with the manufacturer’s specifications. Baseboards shall be thoroughly cleaned after buffing.; Finish Removal - Removal or stripping of all finish down to the flooring material, using compound specifically prepared for this purpose, with steel wool or brush agitation as required, followed by rinsing with plain water to remove all finish material, solution, dirt and film form baseboard edge to baseboard edge.; Floor Waxing and Finishing - All floor waxes or finishes will be compatible with floors on which applied and shall be applied in accordance with the manufacturer’s recommendations.; Floor Touchup - Application of finish material and buffing in heavy traffic areas between primary refinishing as required.; Buffing - All finished floors shall be buffed periodically to remove traffic marks, heavy soil, etc., to be followed by sweeping, vacuuming, or dust mopping to pick up loose residue.; Turned Out Lights - Turn off all lights when not in use. Only specific areas being worked in will be illuminated.; Dusting Horizontal Surfaces Other Than Furniture, Fixtures, and Equipment - Dust with treated dust cloth or vacuum all horizontal surfaces of windows, window ledges, radiators, stair rails, baseboards, tops of panels, and other horizontal surfaces
