Specifications include, but are not limited to: High torque twin screw Benchtop Micro Compounder (maximum 15ml or about 15 ml) 1 EA $________________ $________________ | $________________ $________________ 1 Per the Specifications below: - Screw torque of 40 Nm or higher over the entire rpm range | - Standard co and counter rotating gear drive with a co counter gear box provided so no | tooling is needed to change from co to counter rotating or a similar solution | - Standard water cooled top hopper and elongated forced feeding screws | - Downward spinning possibility of mono- and/or multi-filaments | - Able to handle faster screening of highly viscour or highly filled polymer formulations | - Equipped with divisible extruder barrel and two conical, co-rotating detachable extruder screws | - high wear resistant (at least 64 HRC) and specially heat treated and coated (hardness | 2000 vickers means) | - Processing screws (at least 56HRC) hardened to its cores (hardness 1000 Vickers) | - Processing screws are abrasion resistant to ceramic materials, metal particles and carbon | tubes and fibers | - Barrel and screws have a chemical resistance between pH 0 and 14, up to 450 degrees celsius | - Solid carbide bypass valve to provide the option for recirculation or (continuous) extrusion | - The heating system should have controlled heating zones, and each controlled heating zone | with adjustable temperature. The maximum operating temperature up to 450 degrees celsius. | (Example: Heating time from 80 degrees celsius to 240 degrees celsius is less than | 10 minutes) | - The cooling unit must allow rapid main barrel cooling. (For example, water cooling less than | 10 minutes from 240 degress celsius to 80 degrees celsius)
